您要查找的是不是：
- transverse stress distribution 横向应力分布
- The contact models under different axle loads and transverse forces are calculated separately and the wheel/rail contact stress distribution and rules are obtained. 对不同轴重和横向力作用下的轮轨接触模型分别进行计算，得出了大量的轮轨接触应力的分布及变化规律。
- Using a higher module and thickness viscoelastic layer will decrease the amplitude of interlaminar transverse stress. 采用较高模量和厚度的粘弹性阻尼材料将有效地降低潜艇耐压壳在流场中阻尼振动的层间应力的幅值。
- Moreover, the 3D stress distribution is more undulant than the 2D one. 相对而言，三维的应力分布曲线起伏较大。
- The relation of process parameters with the characteristics and value of transverse stress has been qualitatively analyzed during stretching of rectangle blank with flat anvil experimentally. 通过物理模拟试验，定性地研究了平砧拔长时横向应力的性质与大小对各工艺参数的依赖关系，得出了靠砧宽比参数不能改变横向应力的性质；
- This method depends on determining the change in stress distribution within the model when it is turned upside down. 倒置法的依据是在模型倒置时测定模型内应力分布的变化。
- The materials with proper module can decrease the interlaminar transverse stresses, especially transverse normal stress in the plates. 采用适当模量材料的层合板能有效地降低横向应力，特别是横向正应力。
- The effect on the stress distribution will be negligible except in the immediate vicinity of such points. 除了紧靠荷载作用点的区域以外，上述影响均可以忽略不计。
- We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces. 我们定义了承受平面力的薄板平面应力分布条件。
- Stress distribution is determined in a thin conductive plate containing an elliptic hole under the external electromagnetic loads. 摘要给出一种针对含椭圆孔的导电薄板在电磁力作用下的分析方法。
- The phonon field and phason field stress intensity factors and stress distribution at the crack tips are also given. 进一步可以求得裂纹尖端的声子场和相位子场的应力强度因子,由这些应力强度因子求解了裂尖处的声子场和相位子场的应力分布。
- Finite element analysis has been used to calculate the stress distribution in crystals grown by the Bridgman method. 本文用有元分析法计算了 Bridgman 法生长的晶体中的应力分布。
- Objective: To analyse the difference of the stress distribution during mandible to be forced at the midline. 目的:分析不同年龄的下颌骨正中受力时,下颌骨三维有限元分布的差异。
- transverse stress optical constant 弯曲应力光学常数
- Conclusion:The established model may be used for the stress distribution of MCD. 结论:该模型可用于上颌全口义齿应力分布研究。
- endurance transverse stress test 横向弯曲疲劳试验
- With similar index, model test’s results predicts antetype structure’s stress distribution. 把模型试验的结果按照相似指标推算出原型结构的应力分布。
- The stress distribution and amount of deformation has been counted under different pavage conditions. 计算不同情况下该种管道的应力分布及变形量。
- Objective To observe the stress distribution of maxillary first molar and its periodontium in lingual orthodontics. 目的采用有限元的方法研究舌侧矫治过程中上颌第一磨牙牙根、牙周膜、牙槽骨应力分布的特点。
- Results: Quartz fiber post would not change the inclination of dentinal stress distribution on the whole. 结果：石英纤维桩对牙根部应力分布的总体趋势影响不大；
以上内容独家创作，受著作权保护，侵权必究
海词词典，十七年品牌
