您要查找的是不是：
- storage class declaration 存储类说明
- A code file that contains a class declaration. 包含类声明的代码文件。
- Class header file, scrolled to the start of the class declaration. 类的头文件,滚动到类声明的开头。
- In this case, Of ItemType is used with the class declaration as follows. 在本例中,类声明使用Of ItemType,如下所示
- Declaration needs type or storage class 说明需要类型或存储类
- In the Service. Vb code file, locate the code for the Service class declaration. 在Service.;vb代码文件中定位Service类声明的代码。
- Create the additional variable and add it immediately after the class declaration. 创建另一个变量并将其添加到紧随类声明之后的位置。
- The syntax of a versioned module or class declaration has three parts separated by hyphens. 一个带版本号的模块或类由三个分开的连字符来声明。
- After that, the tranfer protocols and command block sets are discussed in detail according to USB Mass Storage class. 然后针对USB所支持的大容量存储器类别，介绍了其使用的传输协议和命令块集。
- In addition to the POSIX-Extended features the escape character is special inside a character class declaration. 对于POSIX扩展特性来说，转义字符在字符类声明中也是特殊的。
- Introduces the USB Mass Storage Class and Freescale's reference designs such as ATA/ATAPI bridge and Thumb Drive. 还会介绍USB海量存储类应用及飞思卡尔的参考设计，诸如ATA/ATAPI转接桥和优盘驱动器等。
- The system access the U-disk through UFI mass storage class specification according to FAT32 file system specification. 系统利用了UFI命令按照FAT32文件协议格式访问U盘。
- To programmatically define the transaction support level, the EnterpriseServices.TransactionAttribute must be added to your class declaration. 要以编程方式定义事务支持级别;必须将EnterpriseServices.;TransactionAttribute添加到类声明中。
- If the default copy constructor and assignment operator are acceptable, add a comment stating this to your class declaration. 如果默认的拷贝构造函数和付值操作符是可取的,在你的类生命中增加一条注释说明这些。
- The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class. 由于不属于共享存储类别，群集不能使指定资源成为仲裁资源。
- Click the ellipsis button to save the file name to the location of your choice, or to append the class declaration to an existing file. 单击省略号按钮将该文件名保存到所选位置,或将类声明追加到现有文件。
- These extensions are used to specify storage class attributes, function calling conventions, and based addressing, among other things. 这些扩展用于指定存储类属性、函数调用约定和基寻址等等。
- The following example shows a simple class declaration in which the static initializer is used to perform a calculation that only needs to be done one time. 下面的示例显示一个简单的class声明,其中的static初始值设定项用于执行只需进行一次的计算。
- Taking ISP1362 chip-based USB mass storage class device as an example, the frame structure of USB Host system and the designing method for driver of the bottom were described. 以ISP1362驱动USB海量存储类设备为例;描述了嵌入式USBHost系统的框架结构和底层驱动的设计方法.
- Specifically, the client class must be in an assembly of the same name, have the same class declaration, and have members with the same signatures as those on the server. 具体而言,客户端类必须位于同名的程序集中,具有相同的类声明,并且其成员的签名必须与服务器上的相同。
以上内容独家创作，受著作权保护，侵权必究
海词词典，十七年品牌
