您要查找的是不是：
- Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蚀,强度高。铝合金氩弧焊用。
- Graining Technology by Electrolytic Etching on the Surface of Aluminum Alloys. 电镀防护性锌基合金镀层钝化膜的耐蚀性。
- Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys. 良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用。
- Corrosion resistance and high strength, wide range of usage. Argon arc welding of aluminum alloys. 耐蚀、强度高,通用性大。铝合金氩弧焊用。
- Corrosion resistance and high strengthwide, wide range of usage.Argon arc welding of aluminum alloys. 特性和用途:耐蚀、强度高,通用性大。铝合金氩弧焊用。
- For instance, it is necessary to store different calibration procedures for steel and aluminum alloys. 例如，对于钢铁和铝合金，有必要存入不同的校准程序。
- Dodecyltrimethoxysilane(DTMS) films were prepared on LY12 aluminum alloys by electrochemical deposition. 采用电化学技术在LY12铝合金表面沉积制备了十二烷基三甲氧基硅烷(DTMS)膜.
- Study the technique of micro-arc oxidation to aluminum alloys LF21 and LY12 in aluminate electrolyte systems. 研究的是在铝酸盐电解液体中对LF21、LY12铝合金进行微弧阳极氧化的技术。
- Second, and most importantly, many of the strongest aluminum alloys are not weldable using conventional techniques. 第二，也是最重要的一点，很多高强度铝合金不可使用惯用的技术焊接。
- M. C. Flemings, E. Niiyama and H. F. Taylor, “Fluidity of Aluminum Alloys,” AFS Trans., vol.69, 1961, pp.625-635. 蔡俊彦,90年,“砂模铸造铝基碳化矽复合材料流动性之探讨,”大叶大学机械工程学研究所硕士论文
- The fatigue striations were readily observed in stable crack growth regions for both aluminum alloys. 另外，从两款铝-镁合金在裂缝延伸的过程中，发现会有因为裂缝延伸产生裂缝尖端塑性钝化而形成疲劳纹路。
- The metals include high strength steels, stainless steels, superalloys, titanium alloys, aluminum alloys, etc. 主要材料包括：高强度钢、不锈钢、高温合金、钛合金、铝合金等。
- Not all aluminum alloys are weldable. In general, the least weldable alloys are also the strongest alloys. 不是所有合金都是可焊的。通常，最难焊接的合金，其强度也最大。
- MANUELE D,LIDIA A,Alberto B.Cerium-based conversion layers on aluminum alloys[J].Applied Surface Science,2001,172:312. 李国强;李狄.;铝合金稀土转化膜的研究进展[J]
- Laser welding of 5083 aluminum alloys with high power CO2 laser is experimental studied in this paper. 利用高功率CO2激光器,对5083型号的铝合金薄板进行了焊接试验研究。
- Aluminum alloys can be divided into two classes: heat-treatable and non-heat treatable alloys. 铝合金可分为二类：可热处理铝合金和不可热处理铝合金。
- Both the 3 wt.% and 4 wt.% aluminum alloys oxidize at a rate three orders of magnitude slower than pure copper. 这3个野生。%25和4重。%25铝合金氧化的速度在三个数量级低于纯铜。
- The portable aluminum alloy truss. 便携式铝合金桁架。
- Yangxin Aluminum Alloy Wheel Co. 阳新驰骋铝轮有限公司。
- Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys. 抗裂性好,通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金。
以上内容独家创作，受著作权保护，侵权必究
海词词典，十七年品牌
