您要查找的是不是：
- reinforced molding compound 加固的造型混合物
- Bulk Molding Compound is specifically formulated for injection molding of automotive headlamp reflector applications. 玻璃纤维增强团状模塑料，是为汽车车灯设计的特殊配方。
- Bulk Molding Compound with medium strength material with excellent moldability and moderate strength.Used in multi-purpose applications. 玻璃纤维增强团状模塑料，中等强度和优异电性能，低成本，良好的成型性。广泛应用于各种领域。
- EPBGA model consists of seven parts, they are heat spreader, molding compound, chip, substrate, thermal vias, solder ball and PCB board. EPBGA构装体由七个部分所组成，分别为散热板、成形树脂、晶片、基板、热通孔、锡球及印刷电路板。
- Compared with SMC, LPMC is an excellent kind of the sheet molding compound in respect of moulding pressure and equipment etc. 同片状模塑料比较表明,低压模塑料在成型压力、设备等方面具有明显的优势,不失为优秀的片状模塑料品种。
- Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications. 玻璃纤维增强团状模塑料，高等强度和优异电性能，低成本，良好的成型性。广泛应用于各种领域。
- Tension and fatigue tests on a widely used packaging epoxy molding compound (EMC) were performed under room and high temperatures. 对在微电子封装中应用很广的环氧模塑封装材料进行了常温和高温下的拉伸、疲劳实验。
- Thermoset composites are available in Bulk Molding Compound (BMC) or Sheet Molding Compound (SMC), depending on the application. 根据不同的应用领域，我们提供团状模塑料 (BMC)或片状模塑料 (SMC)热固性复合材料。
- The product is a thermosetting molding compound, it is based on phenolic resin as a matrix and mixed with inorganic glass fiber, mineral filler and other additives. 本产品以酚醛树脂为基材,加入玻璃纤维和矿物填料及其它助剂所制成的热固性模塑料。
- The product is a thermosetting molding compound, it is based on phenolic resin as a matrix and mixed with organic fiber and mineral filler and other additives. 本产品是以酚醛树脂为基材,加入有机纤维和矿物填料及其它助剂所制成的热固性模塑料。
- This thesis considers the delamination behaviors between substrate and molding compound for Ball Grid Array (BGA) products caused by the plasma etching process. 中文摘要本文针对阵列锡球封装产品基板和胶饼间所产生的分层作研究。
- This thesis researches to address the occurrence of delamination phenomenon between the interface of molding compound and the copper leadframe die paddle during assembly process. 中文摘要本论文主要针对铜钉架在经过封装制程其本身与胶饼间所产生的脱层现象做研究。
- The method of polypyrrole (PPy) films being synthesized on the surface of insulating epoxy molding compound (EMC) electronic packaging materials and the shielding effectiveness of PPy film were studied. 研究了将导电聚吡咯(PPy)薄膜制备在绝缘环氧模塑料(EMC)电子封装材料表面的方法,及导电PPy 薄膜的电磁屏蔽效能。
- The concrete walls are reinforced with steel rods. 混凝土墙是用钢筋加固的。
- Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds (08. 低压热固性模制化合物的螺线流的试验方法(08。
- The article has detailed the applications and developments of composites used in automobile, such as Fiber-reinforced plastics (FRP) , plastics blends, sheet molding compound (SMC) and so on. 本文详细论述了纤维增强塑料、高聚物共混合金、片状模塑料等复合材料的应用及其发展。
- The properties of dough molding compounds(DMC)/ACM composite were experimentally investigated. 试验研究团状模塑料(DMC)/丙烯酸酯橡胶(ACM)复合材料的性能。
- MgO was used to thicken the low pressure sheet molding compound and crystalline unsaturated polyester was grinded into powder to regulate the viscosity in cavity of hot mold in this process. 摘要采用氧化镁为增稠剂、结晶树脂以粉料形式加入而降低片材热模内粘度的工艺，改进了对低压片状模塑料的增稠方法。
- Our defences must be reinforced against attack. 我们必须加强防御设施以抵御进攻。
- The device is mainly applied for the pre-heating processing for thermo-set resin material such as melamine, epoxy molding compound , bakelite and urea formaldehyde molding powder , etc. 设备主要用于密胺、环氧树脂，酚醛树脂及尿素塑料等热固性材料的加热工序，应用于压缩成型、移送成型、挤出成型等成型工程。
以上内容独家创作，受著作权保护，侵权必究
海词词典，十七年品牌
