您要查找的是不是:
- Using the finite element analysis software MSC. 摘要采用有限元分析软件MSC.
- The finite element analysis of reel structure of aut omobile crane is studied. 对汽车起重机卷筒结构的有限元分析方法进行了研究。
- The finite element analysis and the experimental measurement for GYF-280 type high pressure re-actor were presented. 介绍了GYF-280高压反应釜有限元分析情况和实验测量结果。
- The method is tested by the finite element analysis for a single-layer latticed shell. 利用有限元模拟,应用上述方法对一单层球面网壳结构进行了损伤诊断。
- After the finite element analysis, some were found unreasonable in the structure of the bus body. 通过有限元分析,发现车身结构中存在一些不合理的地方。
- Guyliner 男用眼线笔
- Experimental results verify the correctness of the finite element analysis results. 实验分析结果验证了有限元分析的正确性。
- ABAQUS software is used in this paper for the finite element analysis (FEA) of CFST subjected to pure torsion. 采用ABAQUS软件对纯扭状态下的钢管混凝土进行有限元分析(FEA)。
- The results indicated that the finite element analysis is a efficient research method to guardrail design and occupant protection. 结果表明 ,有限元仿真是进行汽车护栏碰撞研究的有效方法。
- The finite element analysis of the stress distribution in the periodontium of the mandibular incisors by use of multi-loop edgewise arch wire. 多曲方丝对下颌中切牙牙周膜应力分布有限元分析。
- The lateral vibration of the high speed rotating disk cutter slice blade was studied by the finite element analysis and the experimental measurement. 摘要针对高速旋转圆盘刀具薄刀片实际工作时存在的横向振动问题,应用有限元方法及实验测量进行了研究。
- Abstract: The dowel action of reinforcing steel bars crossing cracks is modeled for the finite element analysis of reinforced concrete. 摘 要: 本文提出了一个用于有限元分析的钢筋销栓作用模型。
- The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method. 本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响;
- In the paper,the finite element analysis results indicate that the fiber reinforced composite splint is superior to the steel splint. 通过对纤维增强复合材料锚杆托板与钢托板的有限元分析比较,得出了纤维增强复合材料锚杆托板优于钢托板的结论。
- Finite element analysis of gantry container crane structure is performed with the finite element analysis software ANSYS. 摘要运用有限元分析软件ANSYS对集装箱龙门起重机结构系统进行有限元分析。
- The finite element analysis (FEA) has been applied to model and simulate the chip formation in the metal cutting process. 有限元分析已经被广泛的应用于金属切削加工过程中切屑形成的建模与仿真。
- By the finite element analysis software of DYNAFORM,the forming course of air-condition panel parts was simulated and analyzed. 用DYNAFORM软件对空调面板零件的成形过程进行了有限元模拟。
- In the paper, the finite element analysis results indicate that the fiber reinforced composite splint is superior to the steel splint. 通过对纤维增强复合材料锚杆托板与钢托板的有限元分析比较,得出了纤维增强复合材料锚杆托板优于钢托板的结论。
- In this paper, the mode character of MWM395 engine block is analyzed with the finite element analysis on the platform of I-DEAS. 本文应用有限元法在I-DEAS软件平台上对MWM395柴油机机体进行了模态分析。
- Ansys of the finite element analysis software was used to study on the flatness control action of DSR Backup roll for 2030mm Tandem Cold Rolling Mills. 运用有限元软件对2030冷连轧机组DSR支持辊的板形调控功效进行仿真研究。
以上内容独家创作,受著作权保护,侵权必究
海词词典,十七年品牌