您要查找的是不是：
- single fillet welded lap (joint) 单面搭焊接
- continuous single fillet welding 单面连续焊
- single fillet welded 单面焊接的
- single fillet welded T joint 单面T形焊接
- The existence of residual stress and brace plate in a fillet welded joint has obvious effects on CADC and fatigue life. 残余应力及角接接头中支板的存在对裂纹形态发展曲线和疲劳寿命有明显的影响
- A transversely stressed fillet weld can sustain higher loads than one stressed longitudinally. 受横向应力的角焊缝比受纵向应力的角焊缝承受能力强。
- Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld. 摘要在焦炭塔裙座上开设柔性槽能够减轻裙座刚度影响，降低裙座角焊缝处热应力。
- The butt weld is easier to inspect nondestructively than the fillet welds. 对接焊缝比角接焊缝更容易进行无破坏检查。
- Both single and double fillet welds shall be as follows unless otherwise shown on the drawing. 除非图上另外标明，所有单、双面贴角焊缝高度如下。
- Furthermore,a new simplified elastic method called as inherent shear strain method is developed for forecasting fillet weld's angular distortion. 在此基础上,进一步提出了一种用于预测角焊缝角变形的线弹性简化方法,即剪切固有应变法。
- Beth single end deuble fillet welds shell be es fellews unless etherwise shewn en the drewings. 除非图上另外标明;所有焊缝均为连续全焊透焊接.
- The product contains compound antioxygen and proper rare earth, which have obvious effect on increasing weather fastness of non-conventional PVC and the strength of fillet weld . 由于本产品含复合抗氧剂和适量稀土元素，对于提高PVC异型耐侯性，增加焊角强度效果十分明显。
- Weld joints with flush ends shall be beveled at the front side .Seal welds shall be welded with half the thickness of the carrying fillet weld. 尾带红点的焊点应把前侧切成斜角。密封焊道应焊成现角焊缝厚度的一半。
- Non-watertight weld joints and fillet welding for stiffening member shall be painted after block inspection. 加强构件的非水密焊接接合和填角焊应该在检查完分段后进行喷漆.
- Weld-shape( butt weld width, size of fillet weld) is an indicator of weld features and it also is an important factor of quality welding. 焊缝尺寸(对接焊缝的焊缝宽度、角焊缝的焊角尺寸等)表示焊缝形状特征的指标,是影响焊缝质量的重要因素之一。
- The orthogonal experiments were made to compare the influence of plasticizing degree and that of welding conditions on the fillet weld strength of PVC-U profiled materials. 通过正交试验对比PVC-U型材塑化度和焊接条件对焊角强度的影响试验得知:焊接温度、加热时间及型材塑化度对焊角强度的影响较大,焊接时间与进给压力对焊角强度影响相对较小。
- All the size of fillet welds K are the thickness of the wall except those marked. 未注焊缝焊角高度K均为焊件中薄壁的厚度。
- Fillet welding experiments on the T-joint and the stiffened plate have verified that its... 对T形接头和加筋板的角焊焊接实验证实了该方法对角焊缝角变形的预测结果具有一定的工程价值。
- The forces that developed from the deformation in the cross-frame were primarily transmitted from the connection plate into the web by the upper pair of intermittent fillet welds. 因横向框架中的变形所发生的力最初由连接板通过较上面的一对间断贴角缝传入腹板中。
- The article introduces AWT series automatic fillet welding carriage and the main technical parameters and application in the industry. 介绍一种小型MAG/MIG自动焊接设备及其在工业上的应用。
以上内容独家创作，受著作权保护，侵权必究
海词词典，十七年品牌
