您要查找的是不是:
- oil resistant coating 耐油涂料
- The sealed ring material of slewing ring is manufactured by the oil resistant NBR. 转盘轴承密封圈用材料采用耐油丁晴橡胶制造.
- Resist: Coating material used to mask or to protect selected areas of a pattern from the action of an etchant, solder, or plating. 阻剂:用来选择性保护某图形区域免受蚀刻剂,焊料或电镀影响的涂层材料。
- It cures to a hard wearing and weather resistant coating. 具有漆膜坚硬、耐磨和耐候等特点。
- The oil resistant of NBR-41/ECO BDV was better than that of ECO. NBR-41/ECO动态硫化胶的气密性能与ECO相当,而耐油性能优于ECO。
- A soft, adhesive coating material, such as plaster, grease, or mud. 涂料柔软粘稠的涂抹原料,如泥灰、润滑脂或泥浆
- Static Electricity Resistance Coating Material and the Coating Structure for Internal Corrosion Prevention of Petroleum Product Storage Tanks 油罐内壁防蚀防静电涂料与涂层结构
- They are suitable both for oil coating material and aqueous coating material, with high efficiency and multi-application scopes. 该生产线分一级喷涂一级烘干和二级喷涂三级烘干两种,既适用于油性涂料又适用于水性涂料,是一种多用途高效率涂装生产线。
- BUNa-N is a general purpose oil resistant polymer known as nitrile rubber. 丁腈橡胶(BUNa-N)是一种多用途抗油品腐蚀聚合物,称为腈橡胶。
- The coating material of copolymer has good hardness and glossiness. 共聚物的涂膜具有较好的光泽度及硬度。
- The chloroprene rubber sheath is heat and oil resistant and flame retardant. 氯丁橡胶混合物护套具有耐热、耐油和不延然性能。
- Development trend of intumescent fire resistant coating is presented. 指出了膨胀型防火涂料的发展动向。
- The best prescription included the proportion between drug and enteric coating material (1:4), the dosage of castor oil (1%), and the dosage of micronization silica gel (1.5%). 最佳处方为药物与囊材比例1:4,蓖麻油用量1%25,微粉硅胶用量1.;5%25。
- The gel breaker selected is ammonium persulfate (APS) and the capsulating material - oil resistant polysulfide copolymer latex, water proof blend PVDC CP and mechanically strong silicon modified nanosized latex in combination. 选择过硫酸铵为破胶剂 ,从 10余种材料中筛选出耐油的聚硫 偏丙乳液、防水的PVDC CP、强度好的硅改性纳米乳液 3种材料复合作囊衣。
- Application of LX88A-a cored arc spray coating material resistant to abrasio n and erosion in power station boilers[J].Electric Power,2004,37 (5):88-90. LX88A高硬耐磨耐冲蚀电弧涂层材料在电厂锅炉中的应用[J].;中国电力;2004;37(5):88-90
- Lead as a coating material for the thermal conduXXXon module c-ring. 型环导热模块涂层材料中的铅;
- Acid & alkali resistant and corrosion resistant coatings. 耐酸硷、重防蚀涂料。
- Good water, oil, alternating water and oil resistance. 良好的耐油性、耐水性、耐油、水交替腐蚀性。
- Lead as a coating material for the thermal conduction module c-ring. 热导枪钉模组涂层中所用的铅。
- For these reasons, the use of heat and oil resistant gloves is recommended when handling hot or oily bearings. 因此,搬运发烫的轴承或是油污的轴承时,建议使用防热或防油的手套。
以上内容独家创作,受著作权保护,侵权必究
海词词典,十七年品牌